Matrix Appliances MHG200SS Instrukcja Obsługi Pobierz pdf (Strona 10)

How to Install the Hob

How to install the hob:

Overall dimensions of the hob: Width: 680mm Depth: 500mm

Worktop cut-out dimensions: Width: 557mm Depth: 477mm

1. Make the required hole in the worktop. Note that before doing this, check the

instructions supplied with any cooker hood to ensure that you will have the

required clearance. The cut-out (Fig 6) shows a 61.5mm gap from the wall to

the cut-out edge. The distance for the hob, when ﬁtted, to the back wall

is 50mm.

2. Position the hob seal, as shown in the diagram below (Fig 8), ensuring that the

ends meet without overlapping. Do not use silicone type sealant.

3. Secure the hob to the worktop using the ﬁxing brackets and screws supplied,

as shown in the following diagram (Fig 9). Remove any excess sealant after

tightening the brackets.

Fig.8

Fig.9

3cm

4cm

1 2 ... 5 6 7 8 9 10 11 12

Brak uwag

Matrix Appliances MHG200SS Instrukcja Obsługi Strona 10