Matrix Appliances MHG200SS Instrukcja Obsługi Pobierz pdf (Strona 8)

Natural Gas to LPG Conversion

This hob can be converted from natural gas to propane operation at a nominal

inlet pressure of 37mbar, or butane operation at a nominal inlet pressure of

28/30mbar. This conversion must only be carried out by a competent person

(i.e. a Gas Safe registered ﬁtter).

Instructions to ﬁt replacement injectors:

1. Disconnect the appliance from the gas and electrical supplies.

2. Remove burner components and pan supports.

3. Remove the injectors and replace with the corresponding injector as shown

in the table below.

Setting up minimum ﬂow rates:

1. Remove the control knobs.

2. Turn on the LP gas supply, light the burners and turn the controls to the

minimum position, as indicated by the small ﬂame.

3. Insert a 2.5mm screwdriver into the hole at the top of the tap and turn the

adjustment screw fully clockwise as shown in ﬁgure 6.

4. Turn the controls to maximum position then quickly to the minimum

position - make sure the ﬂame does not extinguish.

5. Replace the knobs.

LPG to Natural Gas Conversion

This hob can be converted from propane operation at a nominal inlet pressure of

37mbar or butane operation at a nominal inlet pressure of 28/30mbar to natural

gas at 20mbar. This conversion must only be carried out by a competent person

(i.e. a Gas Safe registered ﬁtter).

Required:

• 7mmAFnutspinner

• Replacementinjectors

• NGidentityplate

Required:

• 7mmAFnutspinner

• Replacementinjectors

• LPGidentityplate

Fig.4

Burner LPG Injector Natural Gas Injector

Rapid 86 115

Semi-Rapid 67 97

Auxiliary 49 72

Triple ring / wok 100 135

1 2 3 4 5 6 7 8 9 10 11 12

Brak uwag

Matrix Appliances MHG200SS Instrukcja Obsługi Strona 8