Matrix Appliances MHG200SS Instrukcja Obsługi Pobierz pdf (Strona 5)

Care and Maintenence

As the hob has a stainless steel or enamel surface, you should use a nonabrasive cleaner. Any abrasive cleaner (including

Cif) will scratch the surface and could erase the control panel markings. Stainless steel can be effectively cleaned by simply using a

dilute solution of water and mild detergent and drying to a shine with a clean cloth.

Over time with use, the stainless steel surface may discolour; this is normal and does not constitute a fault with this appliance.

Proprietary stainless steel cleaners are available.

The enamelled parts of hobs are not suitable for cleaning in dishwashers; these should be washed by hand

IMPORTANT:

• Steamcleanersmustnotbeusedwhencleaningthisappliance.

• Ensurethatallpartsarecorrectlyreplacedaftercleaningbeforeattemptingtousethehob.

• Afterremovingthepanstands,ensuretherubberpadsareinplaceonthebaseofthepanstandbeforerepositioningthepan

stands straight and level on the hob.

What to do if you smell gas:

1. Open doors and windows

2. Turn the gas supply off

3. Call TRANSCO on : 0800 111 999

Total rated gas input : 11.3kW

Mains electrical voltage: 230 – 240Vac, 50Hz

Total rated electrical consumption: 1.1W

If your Hob is not working

1. Check that the mains supply has not been switched off.

2. Check that the fuse in the spur has not blown.

3. Ensure that the burner components are not excessively soiled as this can lead to ignition problems.

Burner Size Nominal Rating

(kW)

Simmer Rating

(kW)

LPG ﬂow rate (g/h-1)

G30 G31

Auxiliary 1.0 0.45 73 71

Semi-Rapid 1.75 0.6 127 125

Rapid 3.0 0.9 218 214

Triple ring / wok 3.8 2.6 277 272

1 2 3 4 5 6 7 8 9 10 11 12

Brak uwag

Matrix Appliances MHG200SS Instrukcja Obsługi Strona 5